JULABO FL300 Chiller

The JULABO FL300 is the recommended recirculating cooler/chiller option for all cooled Scie-Plas horizontal and vertical gel electrophoresis units.    Unlike other chiller units, which are factory preset at 4°C, the working temperature of the FL300 can be set anywhere between -20 and +40°C, making it ideally suited to many techniques ranging from standard cooled gel electrophoresis to IEF with IPG strips.   The JULABO FL300 recirculating cooler/chiller is approved for use with the following Scie-Plas units: - CHU20 and CHU25 horizontal gel electrophoresis units; all COMET single cell gel electrophoresis systems; IEF-SYS isoelectric focusing unit;  all TV100, TV200 and TV400 K-versions (i.e. K and YK), including all modular systems; and the TV100-EBK and TV400-EBK electroblotters.

DOCUMENTS

• JULABO FL300 chiller
• CHU20 maxi-cooled horizontal
• CHU25 maxi-plus cooled horizontal
• COMET single cell gel electrophoresis systems
• IEF-SYS dedicated isoelectric focusing unit
• TV100 twin-plate mini-gel electrophoresis units
• TV200 twin-plate wide format mini-gel electrophoresis units
• TV400 twin-plate maxi-gel electrophoresis units
• TV complete modular systems
• TV modular electroblotting systems
• TV modular 2-D systems
• TV100-EBK mini and TV400-EBK maxi electroblotters

FEATURES

• Complete System - FL300 (please specify if 230V/50Hz or 230V/60Hz is required)
  FL300 recirculating cooler/chiller unit for 230 Vac mains power supply
• Complete System
  FL300-A recirculating cooler/chiller unit for 110 Vac mains power supply
• Working Temperature Range: -20 to +40°C
• Temperature Control: PID
• Temperature Stability: ±0.5°C
• Display: LED; Display Resolution: 0.1°C
• Refrigerant: R134a
• Pump Capacity Pressure: 350mbar
• Flow rate: 15L/min
• Filling Volume: 3 to 4.5L
• Suitable Fluids:
  Water, water-glycerol & JULABO thermal bath fluids
• Dimensions: (W x L x H) 25 x 50 x 60cm; Weight: 41kg

To locate your nearest distributor click here

Please click here to the previous page.