SCIE-PLAS == Techne® TC-412 Thermal Cycler

HOME
> Electrophoresis
> PCR Products
> Techne® TC-412 Thermal Cycler

PRODUCT RANGES

Techne® TC-412 Thermal Cycler

The new TC-412 thermal cycler is flexible on your protocols but easy on your budget

The TC-412 is a high performance, high sample throughput instrument which is available at a highly affordable price. Please see below for a comprehensive product specification and list of features of the TC-412.

FEATURES

Flexible block format:
A truly user-friendly, fully interchangeable block system allows blocks to be exchanged in a matter of seconds without the need of any tools (60 x 0.5ml, 96 x 0.2ml, 96 x 0.2ml for fully skirted plates, 384-well or flat plate for in-situ).
New design flexible heated lid:
Defined pressure, programmable heated lid to accommodate a variety of consumables.
Intuitive programming:
New 4-line display with intuitive, simple-to-use software with alphanumeric programming, password protection, simple copy/edit functions and much more.
8 Peltiers:
By utilising the innovative Quad Circuit Technology of the TC-512, the TC-412 ensures unsurpassed control accuracy and temperature uniformity.
Low cost:
The TC-412 is probably the most affordable full-sized thermal cycler.
PC networking:
The TC-412 can be connected to a PC along with other Techne cyclers for low volume or high throughput applications using free Gensoft software.

SPECIFICATION

0.5ml Tube Capacity:	60
0.2ml Tube Capacity:	96
384-well block capacity:	yes
In-situ block capacity:	yes
User interchangeable block:	yes
block temperature gradient maximum ramp rate:	3.0°C/sec
Block uniformity at 50°C:	±0.3°C
Temperature range:	4 to 99°C
Temperature set point precision:	0.1°C
Selectable heated lid temperature:	100 - 115°C
Heated lid enable/disable:	yes
Over temperature cut out:	yes
Regulated lid pressure:	yes
Number of programs:	80
Password protection:	yes
Programming:	4-digital alphanumeric
Graphical display:	No
Incremental/decremental temperature:	yes
Incremental/decremental hold time:	yes
Maximum hold time:	18 hours
Minimum hold time:	1 second
Variable programmable ramp rate:	0.1°C/second or step
Run end time calculation:	Yes
Pause and stop facility:	Yes
End of program alarm (enable/disable):	yes
Auto restart on power failure:	yes
Serial port:	RS232
Dual Voltage (120/230V):	Yes
Temperature sensor:	Thermistor
No. of Peltier elements/block:	8
Dimensions L x W x H (mm):	420 x 220 x 260
Footprint L x W (mm):	420 x 220
Connection to PC control program:	Yes
Free software upgrades available:	Yes
Power consumption:	620W
Frequency:	50 - 60Hz
Net weight:	11kg (total)

To locate your nearest distributor click here

Please click here to the previous page.